3/4" Bevel Solid Wood Tongue and Grove Tambour Panel, 11/16" thick x 3 15/16"width x 112"long (The bevel is different from the 201 profile))
SKU: 48171989675

3/4" Bevel Solid Wood Tongue and Grove Tambour Panel, 11/16" thick x 3 15/16"width x 112"long (The bevel is different from the 201 profile))

$62.26 $69.18
Save 10%
No.2 Bestseller on communitymontessori.net >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 4 - Jul 9

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

3/4" Bevel Solid Wood Tongue and Grove Tambour Panel, 11/16" thick x 3 15/16"width x 112"long (The bevel is different from the 201 profile))White River Hardwoods Solid Wood Paneling 3 4 Bevel Solid Wood Paneling SKU SWP201POP 5 Species Made to Order Solid Hardwood Tongue & Groove Does Not Flex Made in the USA A refined bevel profile at 3 4 in solid tongue and groove hardwood. The angled cut creates crisp, consistent shadow lines across flat walls, ceilings, and feature surfaces 11 16 thick, 3 15 16 wide, 112 long. Note: this bevel profile differs from the SWP201. Proudly Made in the USA

White River Hardwoods · Solid Wood Paneling

3/4″ Bevel Solid Wood Paneling

SKU SWP201POP · 5 Species · Made to Order

Solid Hardwood · Tongue & Groove · Does Not Flex · Made in the USA


A refined bevel profile at 3/4″ in solid tongue and groove hardwood. The angled cut creates crisp, consistent shadow lines across flat walls, ceilings, and feature surfaces — 11/16″ thick, 3 15/16″ wide, 112″ long. Note: this bevel profile differs from the SWP201.

Proudly Made in the USA from Premium North American Hardwoods

Crisp bevel shadow lines in solid tongue and groove hardwood — the geometry of the Tambour bevel, without the flex.

Available Options

Species & SKUs

SKU Species Dimensions Min. Order
SWP201POP Poplar 11/16″ × 3 15/16″ × 112″ 21 Pieces
SWP201MA Maple 11/16″ × 3 15/16″ × 112″ 21 Pieces
SWP201RO Red Oak 11/16″ × 3 15/16″ × 112″ 21 Pieces
SWP201W0 White Oak 11/16″ × 3 15/16″ × 112″ 21 Pieces
SWP201WA Walnut 11/16″ × 3 15/16″ × 112″ 21 Pieces

* Pricing is per 112″ length. Minimum order of 21 pieces per species. Made to order — standard lead time 2–3 weeks. Contact White River Hardwoods for larger quantities or project quotes.

Why Solid Wood Paneling

The SWP Difference

▬

3/4″ Bevel Profile

The angled bevel cut creates a defined shadow line at each plank edge. At 3/4", the pattern repeats at a pitch that balances visual impact with versatility — at home in contemporary, transitional, and traditional interiors alike.

↔

Pairs with Tambour

Every SWP profile corresponds directly to a Tambour variant. Mixing flat walls with curved surfaces in the same space? Run SWP on the flat sections and Tambour on the curves — same profile, same species, same finish. Seamless.

🌲

5 Species Available

Choose from Poplar, Red Oak, Maple, Walnut, and White Oak — all premium North American hardwoods. Poplar takes paint beautifully and is our most economical species. Oak, Maple, Walnut, and White Oak are ideal for stained applications.

🎨

Finish Your Way

Panels arrive sanded and ready for staining or painting. Pre-finishing the back face before installation is recommended — it equalizes moisture absorption and reduces the risk of cupping over time.

Technical Specifications

Key Facts

Profile

3/4″ Bevel

Construction

Tongue & Groove

Backing

Solid — No Flex

Thickness

11/16″

Width

3 15/16″

Length

112″

Min. Order

21 Pieces

Lead Time

2–3 Weeks

Use

Interior Only

Before You Install

Storage, Handling & Acclimation

Acclimate First — Always

On receipt, store flat in a controlled interior environment. Allow a minimum of 48 hours to acclimate before finishing or installing. Stack with spacers between planks for air circulation. Solid tongue and groove panels are sensitive to moisture — acclimation ensures dimensional stability and reduces the risk of gapping or cupping after install.

Interior Use Only — Does Not Flex

SWP panels are solid hardwood tongue and groove — they will not bend around curves or corners. For curved surfaces, use the corresponding Tambour flexible panel in the same profile. SWP is not suitable for wet or high-humidity environments.

Installation

Step by Step

1

Prep the Surface

Wall or substrate must be clean, flat, dry, and structurally sound. Tongue and groove panels require a solid, even substrate — check for high and low spots before you start.

2

Acclimate — 48 Hours Minimum

Never skip acclimation. Stack planks with spacers in the installation room for at least 48 hours. Check moisture content if a meter is available — target 6–9% MC.

3

Pre-Finish the Back (Recommended)

Apply a sealer coat to the back face before installation. This equalizes moisture absorption on both faces and significantly reduces the risk of cupping — especially important for painted applications.

4

Apply Adhesive & Nail

Use a quality construction adhesive in continuous beads — perimeter first, then horizontal runs every 6″. Supplement with 15- or 16-gauge finish nails or brad nails through the tongue at each framing member.

5

Leave Expansion Gaps

Leave 1/16″ between adjacent planks and a 1/8″ gap at all perimeter edges. Solid wood moves across the grain seasonally — these gaps are not optional.

6

Finish After Install

Fill nail holes, sand lightly across all planks, then apply your chosen stain, paint, or clear finish. Apply in thin, even coats and allow full dry time between coats.

Installer Advice

Pro Tips

Check Your Moisture

High MC at install means shrinkage gaps later. Low MC means potential swelling and buckling. Target 6–9% before you nail anything down — a moisture meter is cheap insurance on a custom hardwood install.

Mix Planks from Multiple Bundles

Natural hardwood varies in color and grain. Pulling from several bundles and mixing planks as you work prevents banding — where one bundle's color is concentrated in one area of the wall.

Combine with Tambour on Curves

SWP on flat surfaces, Tambour on curved or radius surfaces — same profile, same species, same finish. Plan your layout before you start so the two materials meet cleanly at the transition.

Made to Order — Lead Time & Minimums

SWP panels are made to order in your chosen species. Standard lead time is 2–3 weeks from order confirmation. Minimum order is 21 pieces per species. For larger quantities, custom lengths, or project-specific requirements, contact White River Hardwoods for a tailored quote and timeline.

The 3/4″ Bevel SWP — solid tongue and groove hardwood, 11/16″ × 3 15/16″ × 112″, made in the USA.


Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 48171989675

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 2133 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
J
Verified Purchase
J. Owens
Pawtucket, US
★★★★★ 5
My favorite E edger so far.
Color: Yellow
For a battery powered unit, it was much better than I expected. Powerful enough to do everything in my yard. It beats even some of my previous good gas ones. I did my whole large front yard with a little more than one battery. Pretty good, actually.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 5, 2026
G
Verified Purchase
Gregory M. Spitzer
Belleville, US
★★★★★ 4
Does a good job, and works pretty well. Took weeks to have it delivered.
Works pretty well, seems to be slightly underpowered. I think it would work better if the soil here were drier. The shroud around the blade would probably not jam up with dirt if the soil here is drier. I was constantly having to remove the battery and using a screwdriver to remove the dirt from the shroud. The shroud would work better if it was larger. There is an adjuster that lowers a metal guide that fits up against the concrete that helps you to keep the blade right up to the edge, make sure to lower that guide into place. The 20 Volt Max batteries I used are hard to insert and remove, but mine are aftermarket batteries, and another tool I own is also hard to insert and remove the same batteries.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 18, 2025
D
Verified Purchase
Duane Broussard
Lake Worth, US
★★★★★ 1
3 SCORE 18 Duane Broussard
Color: Yellow
Good luck with trying to find blades. To work properly one has to find a blade with a center hole of 7/16” diameter OBLONG so it can engage the motor shaft and not spin freely DO NOT BUY THIS REPEAT DO NOT BUY THIS
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 3, 2026
A
Verified Purchase
Amazon Customer
Draper, US
★★★★★ 5
Easy to use edger.
Color: Yellow
The husband really likes the ease of use. Makes a beautiful cut.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
T
Verified Purchase
Tddyd
Fort Morgan, US
★★★★★ 5
Make sure you have original DeWALT batteries
Color: Yellow
I thought there was something wrong with the edger but it was the batteries. Must use original DeWALT batteries. I have cheap replacement batteries that work fine for all my DeWALT tools but do not work with this edger. Will run for a few seconds and shut off. With original DeWALT batteries, this edger works great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2026

recommand products

Kiwi Latex Palm Coated String Knit Work Gloves [R50102]
115.00
Technomarine para caballero
105.00
BMC Single Air Universal Conical Filter - 60mm Inlet / 100mm Filter Length
63.80
King of Kings Royal Blue parfum
95.00
Lattafa Najdia intense
65.00