Pay in installments of $39.96 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 22 - Jul 27
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
PolarStar High-Pressure Solenoid Valve – 200 PSI EditionPolarStar High Pressure Solenoid Valve 200 PSI Edition Heavy Duty Upgrade Erhhter Arbeitsdruck Przise Performance Das PolarStar 200 PSI Solenoid ist ein spezialisiertes Upgrade Bauteil fr die HPA Systeme F2 und JACK. Whrend Standard Solenoids oft bei ca. 120 PSI ihre Grenze erreichen, ermglicht dieses verstrkte Magnetventil einen sicheren Betrieb bei deutlich hheren Drcken. Es ist die ideale Lsung fr Setups, die eine extrem hohe Luftmenge oder
PolarStar High-Pressure Solenoid Valve – 200 PSI Edition
Heavy-Duty Upgrade | Erhöhter Arbeitsdruck | Präzise Performance
Das PolarStar 200 PSI Solenoid ist ein spezialisiertes Upgrade-Bauteil für die HPA-Systeme F2 und JACK. Während Standard-Solenoids oft bei ca. 120 PSI ihre Grenze erreichen, ermöglicht dieses verstärkte Magnetventil einen sicheren Betrieb bei deutlich höheren Drücken. Es ist die ideale Lösung für Setups, die eine extrem hohe Luftmenge oder spezifische Leistungsspitzen erfordern, ohne die Zuverlässigkeit des Ventils zu gefährden.
1. Exklusive Hersteller-Features & Technik
- Erweiterter Druckbereich: Speziell vom Hersteller für Arbeitsdrücke von bis zu 200 PSI zertifiziert. Dies bietet zusätzliche Sicherheit gegen Überdruckschäden ("Venting").
- Optimierter Durchfluss: Trotz der verstärkten Bauweise bietet das Ventil die gewohnt schnellen Schaltzeiten für ein exzellentes Trigger-Ansprechverhalten.
- Plug-and-Play Kompatibilität: Das Ventil ist mit den Standard-Kabelbäumen und FCUs der JACK- und F2-Systeme kompatibel und lässt sich direkt austauschen.
2. Einsatzbereich & Vorteile
- DMR & High-Power Setups: Besonders vorteilhaft für Systeme, die aufgrund langer Läufe oder schwerer BBs mit höherem Eingangsdruck arbeiten müssen.
- Langlebigkeit: Durch die robustere interne Konstruktion ist dieses Solenoid weniger anfällig für Verschleiß bei intensiver Nutzung unter hohem Druck.
- Original PolarStar Qualität: Keine Kompromisse bei der Fertigungstoleranz – entwickelt und getestet in den USA.
3. Wichtiger Hinweis für Kunden in Deutschland
Information zur Zulassung & Betrieb: Dieses Bauteil ermöglicht einen Betrieb bei erhöhten Druckwerten. Wir weisen ausdrücklich darauf hin, dass jede Leistungssteigerung an einer Airsoftwaffe in Deutschland die ursprüngliche F-Zulassung beeinflussen kann. Der Nutzer ist dafür verantwortlich, dass die Waffe die gesetzliche Energieobergrenze nicht überschreitet. Zudem darf durch den Einbau bzw. die FCU-Konfiguration keine Full-Auto-Funktion (bei Systemen über 0,5 Joule) aktiviert werden. Ein Einbau durch eine Fachwerkstatt wird empfohlen.
Technische Daten (Herstellerangaben):
| Spezifikation | Details |
|---|---|
| Max. Arbeitsdruck | 200 PSI |
| Kompatibilität | PolarStar JACK / F2 (Universal Fit) |
| Anschluss | 2-Pin JST Connector (Standard FCU) |
| Herstellungsland | USA |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 14 reviews
Sort
Product Reviews
★★★★★ 5
Works
Size: 3 Panel-102'', Color: Beige, Size: 3 Panel-102'', Color: Beige
It’s beige and not white. Once install - hard to disinstall. Need a drill to put it together
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it.
Couple things:
1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky.
One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection.
Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it.
2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless.
3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together.
4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place.
5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options.
NOW on to the utility itself.
1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great!
2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world.
3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it.
All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
★★★★★ 5
Good product, poor directions.
Color: Black, Size: B-88''W-4 Panel
The quality of the product was better than most at this price. The directions could have been much better even though I have an engineering background.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 1, 2025
★★★★★ 4
Nice partition for my basement
Color: Beige, Size: B-102''-3 Panel
This 3-panel room divider showed up well-packaged with all the parts and even a little tool for putting it together. The instructions were easy to follow, and while one person can definitely assemble it, having two makes it quicker and less frustrating.
It does exactly what I needed—gives quick, easy coverage in an open area. I'm using it in my basement to hide the furnace and water heater, and it works great for that. It looks nice overall, but I picked the beige fabric (which is really more of a tan), and the black frame makes it stand out more than I’d like. A white or lighter frame would’ve blended better. Not sure that I would use it anywhere besides the basement
It’s lightweight and pretty sturdy. The wheels make it easy to move, but it does get a bit wobbly, and the panel clips need to be readjusted every time you roll it somewhere new. Still, for the price, it’s a solid buy. I’m happy with it and planning to order another one.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 21, 2025