Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 6 - Jul 11
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
trek allant 7 staggerAllant+ 7 Stagger una e bike che si aggiudicata numerosi premi. Pensata per chi si reca al lavoro in bicicletta e per tutti i ciclisti che desiderano un mezzo resistente ed elegante equipaggiata con una sospensione anteriore che assorbe le asperit del fondo stradale. IIl potente e connesso sistema di trasmissione intelligente Bosch, i componenti di qualit e i numerosi dettagli di design rendono questa bicicletta elettrica una soluzione eccellente per
Allant+ 7 Stagger è una e-bike che si è aggiudicata numerosi premi. Pensata per chi si reca al lavoro in bicicletta e per tutti i ciclisti che desiderano un mezzo resistente ed elegante è equipaggiata con una sospensione anteriore che assorbe le asperità del fondo stradale. IIl potente e connesso sistema di trasmissione intelligente Bosch, i componenti di qualità e i numerosi dettagli di design rendono questa bicicletta elettrica una soluzione eccellente per muoversi quotidianamente in città.
Specifiche
*Nota: le specifiche valgono per tutte le taglie a meno che non siano elencate separatamente
Kit telaio
| Forcella | SR Suntour XCR32, molla elicoidale, regolatore di precarico, blocco, QR 100mm, escursione 63mm |
|---|---|
| Escursione max. compatibile della forcella | 63mm |
Ruote
| Mozzo anteriore | Shimano TX505, centerlock |
|---|---|
| Mozzo posteriore | Shimano TX505, centerlock |
| Cerchio | Alex MD35, compatibile tubeless, 32 fori, larghezza 35mm, valvola Presta |
| Pneumatico | Schwalbe G-One, Performance, RaceGuard, con striscia riflettente, 57-584 |
| Dimensioni max. dello pneumatico | 27.5x2.40" |
Sistema elettronico
| Batteria | Bosch PowerTube 625Wh, sistema intelligente |
|---|---|
| Charger | Bosch standard 4A, 230V, sistema intelligente |
| *Computer |
Misura: S, M, L Bosch Kiox 300, smart system |
|
Misura: S, M, L Comando remoto LED Bosch, sistema intelligente |
|
| Motore | Bosch Performance Line CX, Smart System, corpo motore in magnesio, 85 Nm |
Trasmissione
| Comando | Shimano Deore M5130, 10 velocità |
|---|---|
| Deragliatore posteriore | Shimano Deore M5130 |
| *Guarnitura |
Misura: S, M ProWheel lega, lunghezza 170mm |
|
Misura: L ProWheel lega, lunghezza 175mm |
|
| Corona | ProWheel 40T acciaio stretta/larga, con protezione in lega |
| Cassetta | Shimano LG400, 11-43, 10 velocità |
| Catena | Shimano LG500, 9/10/11 velocità |
| Pedale | Pedali antiscivolo con catarifrangenti |
| Dimensione max. della corona | 1x: 48T |
Componenti
| Sella | Bontrager Commuter Comp |
|---|---|
| *Reggisella |
Misura: S, M Lega Bontrager, 31,6mm, offset 12mm, lunghezza 330mm |
|
Misura: L Lega Bontrager, 31,6mm, offset 12mm, lunghezza 400mm |
|
| Manubrio | Lowriser in lega, 31,8mm, 25mm, backsweep 11 gradi, larghezza 690mm |
| Manopole | Herrmans Clik, ergonomico, lock-on |
| *Attacco manubrio |
Misura: S, M Bontrager in lega, morsetto da 31,8mm, rise regolabile, compatibilità Blendr, lunghezza 85mm |
|
Misura: L Bontrager in lega, morsetto da 31,8mm, rise regolabile, compatibilità Blendr, lunghezza 105mm |
|
| Serie sterzo | FSA Integrated, cuscinetto a cartuccia sigillato, 1-1/8" superiore, 1.5" inferiore |
| *Rotore freno |
Misura: S, M, L Shimano RT30, centerlock, 180mm |
|
Misura: S, M, L Shimano EM300, centerlock, 180mm |
|
| Set freni | Disco idraulico Tektro HD-M275 |
| Dimensione del disco | Dimensione rotore del freno max: 180mm anteriore & posteriore |
Accessori
| *Luce |
Misura: S, M, L Spanninga SOLO per e-bike |
|---|---|
|
Misura: S, M, L Herrmans H-Black MR8-E, 180 Lumen, 60 Lux, LED, luce anteriore |
|
| Cavalletto | Pletscher Comp Flex 18 |
| Portapacchi | Portapacchi posteriore in alluminio compatibile MIK, carico massimo 25 kg |
| *Parafanghi |
Misura: S, M, L SKS in plastica, anteriore |
|
Misura: S, M, L SKS in plastica, posteriore |
Peso
| Peso | M - 23,20 kg / 51,15 lbs |
|---|---|
| Limite di peso | Questa bici presenta un limite di peso massimo complessivo (peso combinato di bicicletta, ciclista e carico) di 136 kg. |
Ci riserviamo il diritto di apportare modifiche alle informazioni dei prodotti presenti sul sito in qualsiasi momento senza preavviso, ivi inclusi i dati relativi a equipaggiamento, specifiche, modelli, colori, materiali e prezzi. A causa di problemi sulla catena di approvvigionamento, le parti compatibili possono essere sostituite in qualsiasi momento senza preavviso.
I pesi di bicicletta e telaio si riferiscono a prodotti verniciati in pre-produzione al momento della stampa. Il peso del prodotto finito potrebbe variare.
Geometrie
Misure
| Misura | Altezza ciclista | Interno gamba |
|---|---|---|
| S |
155 - 165 cm 5'1" - 5'5" |
72 - 78 cm 28" - 31" |
| M |
165 - 175 cm 5'5" - 5'9" |
77 - 83 cm 30" - 33" |
| L |
175 - 186 cm 5'9" - 6'1" |
82 - 88 cm 32" - 35" |
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 753 reviews
Sort
Product Reviews
★★★★★ 5
Very good product at a fair price
Model: SLH20025
Very good sound deadener and heat shield, it is a bit sticky to work with, but easy to shape and cut
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026
★★★★★ 5
I wish I had Siless 20 years ago!!!
Model: SLH20025, Model: SLH20025
I have installed all kinds of insulation in vehicles over many years. I only needed to purchase 2 boxes to complete the entire interior siding of my 2025 chevy express, what a great value! I wanted to insulate my locksmith van for sound and heat. The sound reduction virtually eliminated the road noise. These panels also look amazing. It got up to 110F in the sun with the doors closed. After adding Siless insulation the temperature maxed out at 97F. That is a massive difference. Plus, I didn't even finish with the roof before testing. Siless Hybrid 3in1 was extremely easy to cut and adhere onto metal panels. I'm impressed with the quality of the individual panels and the adhesive is not toxic smelling compared to some others. My favorite thing about these panels is you can actually take them off and readjust them before they finally stick and they do not leave any black residue behind when you pull them up to adjust them. All I needed was a heat gun, knife and a roller to complete this job. The size of each panel is perfect, you can handle them with ease. I probably won't need your product again for a while, but when I do I will definitely be back.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 21, 2025
★★★★★ 5
Works well and is easy to install.
Model: SLH20025, Model: SLH20025
I was sound and heat insulating a generator bay in my class A RV so I did three tests before and during material application: I did a sound level test to see how effective the material was for my application, a "stickiness" test, and a flammability test. This was indoors on a dry 78°F day. From beginning to end, the entire process, including testing, took 5 hours to install 25 sqft or material in a very complex area. One hour for cleaning, 3 hours for installation, and 1 hour for test setup and testing.
Using a sound meter, I took before and after readings and determined that I reduced the sound level by 2.2 db (40% energy decrease) with a noticeable decrease in sound and frequency. The generator bay is located under the master bedroom in the aft portion of the coach. The sound went from a rattling, vibrating generator noise to a more tolerable low level rumble.
The material was easy to apply. I did some testing prior to application and determined that surface preparation is key. I cleaned my painted metal surface and then degreased with acetone and the material stuck well. Be careful and purposeful when you apply the material because once it was stuck to the metal, it was quite difficult to remove or reposition.
Since it was going to be installed into a gasoline powered generator bay located under our sleeping quarters, I did some flame testing to determine the level of risk. Although not highly flammable after installation, my testing revealed that the PE used will catch on fire under certain circumstances. In order to reduce the risk, I used aluminized duct tape to ensure that all the edges were sealed and the PE was not exposed to direct flame in the event of a fire. I also decided to install an automatic fire extinguisher as an added precaution. In all fairness there should be one installed in the generator bay anyway.
All in all, I am very satisfied with the product and the results. I have recommended this product to my other RV owner friends.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2025
★★★★★ 5
Great product. Best value i could find
Model: SLH20025
I'm using talk to text, so forgive any grammatical and spelling errors.
I ordered this product after doing a bit of research on sound dampening materials. I had been doing car stereo for quite some time since my teens. Itook a break for 20 years or so. I'm now 40 and back in the day there was dynamat. And that was about it. as irecently bought a new 2017 F350 crew cab. I wanted to put in a new stereo system and being that it was my dream truck. I was going to put in my dream stereo. But before I could do that, I needed to start with the sound deadening. I looked into today's leading product and found a company called resonx. Had taken their place as king of the hill in sound deadly. I researched their products and found the materials they were built from and Silas was the closest match at the best price I used Silas Max. First, then Silas 3 and 1 hybrid over that on all exterior panels. Then, on the interior panels. I used the 3 and 1 hybrid . on the floor I used Silas Max. Then, the 3 and 1 hybrid, then Silas liner over that the car is incredibly quiet . As far as sound dampening and deadening, it works very well for the money really can't beat it. Do your homework no How and where to apply it? And you really can't go wrong or about $400. I did. What would have cost me easily? Two thousand in other brands highly recommend the product prep work.Is everything do your homework?Do it right and you will be happy with this stuff
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 6, 2026
★★★★★ 4
Not simple, nor easy
Model: SLH20025
I wanted to add sound proof material to the bare metal areas on the floor of my Toyota Tundra. The area behind the front seats had a haphazard application of sound deadening material. There were several complications to the project which may come up in other vehicles.
First is the floor covering which had plastic pillars underneath to support any weight on the cover. The sound deadening material had to be cut out so these pillars would rest on the bare metal of the floor. This required a lot of cutting with a utility knife and at times heavy scissors. The instructions say to make a template before cutting the material and I did this for the driver's side. This doubled the amount of time needed to install it. On the passenger's side I laid the rectangles of material with the backing on and pressed the floor covering onto the material. This showed where the support pillars were, which I then cut out.
Second is peeling the backing off the material. This can be very difficult as the adhesive sticks to it. The backing came off in multiple pieces and sometimes took 5 minutes for one piece. They say to wear gloves when handling the material but this is impossible when trying to get the backing off.
Third is pressing the material onto the metal. The instructions say to use a roller, but this was impossible for the irregular surface I was working on. The hand is the best tool to press the material on.
The material seems to be of high quality and I expect it will reduce the road noise in the cab.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 18, 2025
recommand products
Japan – Herbst – Anemone hyb. 'Honorine Jobert' – ↕10-25cm – Ø9cm – 60 Pflanzen – Weiße Herbstblüte – Pflegeleicht – Sonne & Halbschatten
112.25
Kriechender Günsel Ajuga reptans 'Burgundy Glow' – ↕10-25cm – Ø9cm – 12 Pflanzen – Bienenfreundlicher Bodendecker – Winterhart & pflegeleicht
61.50
kompatibel mit whoop 5 nylonarmband schwarz
21.99
Rotblühender Scheinsonnenhut Echinacea p. 'Magnus' – ↕10-25cm – Ø9cm – 12 Pflanzen – Winterharte Staude – Bienen – & Schmetterlingsfreundlich
56.95
kompatibel mit whoop 5 nylonarmband polarstern
21.99