SKU: 2803891492

Melon | Helm | Brightest | matte

Sale price$64.76 Regular price$71.95
Save 10%

Pay in installments of $17.99 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 17 - Jul 22

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Melon | Helm | Brightest | matteMelon Urban Active Helm Brightest matte Nein, Melon macht nicht ausschliesslich Helme, die aussehen wie eine Melone. Nur einen. In der Urban Active Collection findest du alles von der schlichten Core Collection in Weiss, Grau und Schwarz ber die Rainbow Collection bis zur Story Collection mit Helmen, die was zu erzhlen haben. Was alle Skate und Fahrradhelme von Melon auszeichnet, egal in welchem Design: Die hohe Qualitt und die ausgefeilte

Melon Urban Active | Helm | Brightest | matte

Nein, Melon macht nicht ausschliesslich Helme, die aussehen wie eine Melone. Nur einen. In der Urban Active Collection findest du alles von der schlichten Core Collection in Weiss, Grau und Schwarz über die Rainbow-Collection bis zur Story Collection mit Helmen, die was zu erzählen haben. Was alle Skate- und Fahrradhelme von Melon auszeichnet, egal in welchem Design: Die hohe Qualität und die ausgefeilte Konstruktion, welche hohen Komfort und maximale Sicherheit verbinden.

Facts Melon Helm Urban Active | Brightest | matte

  • Gewicht: 350 Gramm (bis 30% leichter als herkömmliche Helme)
  • Patentierter Magnetverschluss: einfache, einhändige Bedienung
  • Melon Airflow Channel System: kühlende Belüftung mit 12 Luftlöchern
  • Ideale Passform: stufenlos verstellbare Spin Dial im hinteren Teil des Helms
  • Strapazierfähige EPS-Schalen: maximale Sicherheit und extra lange Lebensdauer

Wie messe ich den Kopfumfang?

Wir erklären dir wie du ganz einfach deinen Kopfumfang messen kannst, um du die passende Helmgrösse zu wählen.

Schritt für Schritt Anleitung

  1. Lege ein Massband (Oder eine Schnur) waagrecht um den Kopf. Position ca. 2.5 cm oberhalb von deinen Augenbrauen.
  2. Lese den gemessen Kopfumfang in Zentimeter ab oder miss die entsprechende Schnurlänge auf einem Massstab oder Klappmeter ab.
  3. Anhand des gemessenen Kopfumfangs kannst du nun die passende Helmgrösse wählen.

Achtung

Bei Zwischengrössen solltest du immer das grössere Modell wählen. Die meisten Helme haben unterschiedliche Polsterungen dabei, dank welchen Zwischenräume optimal geschlossen werden können.

Grössentabelle für Helme

  • 46cm-52cm: XXS-S
  • 52cm-58cm: M-L
  • 58cm-63cm: XL-XXL

Unser Fazit

Im Gegensatz zu den meisten Skater-Helmen ist der Melon innen mit einer anschmiegsamen High-Tech-Gewebe ausgepolstert. Das macht ihn um bis zu 30 % leichter als vergleichbare Hartschalenhelme. Alle drei Basisgrössen lassen sich individuell durch ein Stellrad an die eigene Kopfgrösse anpassen. Mehrere Bänder sorgen dafür, dass nichts verrutschen kann, wenn es darauf ankommt. Zwölf Löcher leiten kühle Luft in Kanälen nach innen. In Verbindung mit den hygienischen Polstern bekommst du damit einen besonders angenehmen Tragekomfort. Zwei besondere Extras: die Magnetschnalle und das praktische Visier, das dich wie der Schirm eines Baseball-Cap vor Sonne und Wind schützt.

Über Melon Helme

Melon Helme kombinieren die höchsten Sicherheitsstandards mit preisgekrönten Designs und schaffen damit Produkte, welche nicht nur gern getragen werden, sondern auch ein hohes Mass an Schutz bieten. Über 40 künstlerische Designs bieten eleganten Schutz für Skateboarder, Radfahrer, Scooterfahrer und Inline Skater. Die äussere Schale von einem Melon Helm besteht in der Regel aus einem Melon-Polycarbonat, welches superleicht ist und die Auswirkungen bei einem Aufprall abfedern kann. Im Innern des Helms befindet sich eine herausnehmbare und waschbare Coolmax Polsterung, welche für höchsten Tragkomfort und Hygiene sorgt. Melon Helme sind die perfekte Wahl für Kinder und Erwachsene, welche ihre Köpfe mit einem toll designten und sicheren Helm schützen möchten.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 2803891492

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.1 ★★★★★
Based on 10 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
N
Verified Purchase
Nathan B.
Chelsea, US
★★★★★ 5
Quality Stand
Size: 13"-27", Style: Triple
Solid, heavy duty and well made. I purchased this as I was adding a third monitor to my setup. So I had to choose between buying a 2nd mount that had one arm on it, or just replace my 2 arm setup with a single 3 arm setup. I'm glad I went this route. Very easy to assemble and it feels heavy duty. I've been using it daily for about 2 months now and it's held up perfectly. Zero issues with assembly and the instructions are well written. The mount options are solid and the metal is thick. Quality product at an amazing price.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 11, 2025
T
Verified Purchase
terry
Carnegie, US
★★★★★ 4
Overall, very good for the price.
Size: 13"-32", Style: Single, Size: 13"-32", Style: Single
For the price, I’m pleased with it. Overall, it’s a sturdy stand with quality machining. All the screws went in easily, poorly machined products have crooked holes or bad threads. The mount base comes with 2 types, standard mount for a desktops surface. The other one is for desktops with monitor holes/cabling drilled through them. All the parts are heavy gauge and I encountered no difficulty during assembling. There seems to be a tension screw for the tilt feature. I had to tighten the screw that holds the tilt joint together because out of the box, the monitor flopped forward hard. I had to be mindful while mounting it to the main arm so it wouldn’t slam into my glass desktop. The 2 arms that allow you to move the monitor forwards and back, left and right were a little stiff, I loosened the screw a bit on the main arm, at the pole. That seemed to be all that was required. I tried to loosen the bolt where the 2 arms meet, and it wouldn’t budge. I didn’t force the issue. The instructions were adequate for assembly without covering anything else, like adjusting the tilt bolt for the weight of the monitor. So, while I think this was a good mount for the investment, there are tradeoffs to mention. I’m accustomed to swinging my monitors upward and dusting underneath them. Height is fixed by a screw on this one. I was struggling to install the monitor cables when I realized you can tilt the bottom toward you until the top or the monitor hits the pole, or, until it’s sitting nearly flat like a table. Elevated several inches above the desktop. I consider this a Pro / Con feature. Where the arm ties into the VESA mount, the fit is a little sloppy. It’s not a safety concern but I can wiggle the monitor backwards and forwards at the outer edges “About ¾ inch “before feeling any resistance from the mount. Same goes for tilting. I don’t see this as much of an issue. Normally, I don’t foresee any outside forces acting in the monitor to create a problem. However, there’s room for improvement. The rest of the machining seemed steller. I have multiple computers in different rooms. 32” monitors are used as primary monitors with 32” to 23” as secondaries. I like mine roughly 1” above the desk. That places the top of the monitor at my eye level and the ideal viewing angle. I have fully articulated, hydraulic mounts on most of my monitors. Nice ones for large heavy monitors run $75 to $100 and up. I paid $36 for this one. The……… WALI Monitor Arm Mount for Desk, Single Extra Tall Computer Desk Mount, Monitor Bracket Mount Stand Single, up to 32 inch, 22 lbs (M001XL), Black. Amazon lumps the reviews of similar products together, so I specified which mount I purchased. I’m using this one on a glass desktop, I’m attaching it to the same point I constructed from wood for a different mount. It didn’t lower the monitor low enough either. So, the top of that mounting point is 4” lower than the surface of the glass top. Despite being that low, I didn’t actually need the 32” pole / monitor mount, the 16” model would have worked. There’s still 2” of pipe available above the arm. The 32” was on sale & I didn’t know if the 16” would suffice. The pole is a screw together 2 piece. I unscrewed / removed the other pole as it looked out of place in my dual computer setup. That leaves a hole in the top of the pipe / mount. I wish they included a cap for that. The top pipe has a cap but of a different diameter. I’d like to give it 4 ½ Stars but Amazon won’t let me. I’ve got to go with 4. Height adjustments with heavy monitors and an Allen wrench can present a challenge, it’s the nature of the beast and I won’t give it 5 stars for a few reasons. The sloppy VESA mount and loose tilt motion. No instructions that cover that, or if I was supposed to loosen the arm at the pole to improve motion. I would recommend this mount to others.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 18, 2024
J
Verified Purchase
J. Masotti
Louisville, US
★★★★★ 5
Excellent mount, especially if you want your monitor mounted higher above the desk.
Size: 13"-32", Style: Single
This is the monitor mount I should have had all along. The extra tall pole allowed me to mount my 32" monitor at the correct height (something I couldn't do with the spring-mount I previously had. It came with good directions, everything needed for install except for a Phillips head screwdriver and a 10mm wrench for one cap nut. The arm that holds the monitor is highly adjustable, and once everything is tightened down, very sturdy. I recommend this one without reservations.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 1, 2026
R
Verified Purchase
Ron
Pawtucket, US
★★★★★ 5
Easy and Functional for 3 Monitor Setup
Size: 13"-27", Style: Triple
Some assembly required. Used this to re-configure my 3 monitor setup. 2 27" monitors across the bottom and a 20-ish" monitor up top. First and foremost, anything bigger than 27" on the bottom two and it will not work. The span was just barely long enough for my application and still allow for any articulation of the monitors. I would prefer to have them angle towards me just a little more, but it works. Assembly was straight-forward. Instructions were pretty clear as far as the pictures go. I didnt actually read the text, but thats pretty much how obvious it is to assemble and mount the monitors. The tubing and clamps feel heavy-duty. With the exception of a drill, drill bits, and phillips head screw driver, they provide the tools and hardware necessary to assemble, mount and adjust the monitors, to include longer screws and offsets for the monitors if required. Installation on my desk went well. I used the through hole option strictly due to the desk not being able to accomodate the clamp. Word of caution... with all three monitors hung on the mount, this thing is HEAVY and all supported by just the main tube. If you use the clamp option, make sure your desktop/tabletop will allow the clamp to fully seat. Otherwise, you run the risk of it slipping loose and you'll be wearing the monitors if you happen to be sitting in front of them when it comes down. Once all the monitors are mounted, the overall setup is surprisingly sturdy considering the size of the main support tube. Yes, it will wobble some, but overall, it works pretty well and once the clamps are locked into place the monitors stay in place. Took a couple of hours for me to get it all set up, but it could be done quicker I'm sure. All in all, me likey!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 13, 2022
M
Verified Purchase
Mark L. S.
Carnegie, US
★★★★★ 5
Good value, well made, easy assembly.
Size: 13"-32", Style: Single
Well made, easy assembly, very versatile and cable management included.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 11, 2026

recommand products