SKU: 14252265317

Lazer Lamps Canny Interface (Direct Connect - inkl. Kabelsatz)

$166.50 $185.00
Save 10%
No.2 Bestseller on communitymontessori.net >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 12 - Jul 17

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Lazer Lamps Canny Interface (Direct Connect - inkl. Kabelsatz)Canny ist eine CAN Schnittstelle, die von Lazer Lamps entwickelt wurde und die Installation von Zusatzleuchten fr ausgewhlte Fahrzeuge mit CAN Kommunikationssystemen ermglicht, bei denen es sonst nicht mglich ist, 12 V Beleuchtungssignale beispielsweise an der Rckseite des Fahrzeugscheinwerfers abzurufen. Das System, bestehend aus einem Canny Dongle, plus Kabelbaum und untersttzt durch eine spezielle App (CANNY. LZR), profitiert davon, dass es im

Canny ist eine CAN-Schnittstelle, die von Lazer Lamps entwickelt wurde und die Installation von Zusatzleuchten für ausgewählte Fahrzeuge mit CAN-Kommunikationssystemen ermöglicht, bei denen es sonst nicht möglich ist, 12-V-Beleuchtungssignale beispielsweise an der Rückseite des Fahrzeugscheinwerfers abzurufen. Das System, bestehend aus einem Canny-Dongle, plus Kabelbaum und unterstützt durch eine spezielle App (CANNY.LZR), profitiert davon, dass es im Motorraum Ihres Fahrzeugs für eine schnellere und einfachere Installation oder im Fahrzeug selbst montiert werden kann. Bluetooth-Synchronisierung und Updates über Funk erhöhen die Benutzerfreundlichkeit und die Installationsgeschwindigkeit des Systems.

Der Dongle besteht aus einem Molex-Stecker nach Automobilstandard, der eine vollständig wasserdichte Lösung gemäß IP68 sicherstellt. Integrierte Designelemente und enthaltene Kabelbinder erleichtern die Montage der Einheit. Die Platzierung des Geräts im Motorraum ist aufgrund der einfachen Installation vorzuziehen, hängt jedoch vom Anschlussort der CAN-Hi-/CAN-Lo-Kabel an jedem Fahrzeug ab.

Der Anschluss an die CAN-Leitungen des Fahrzeugs erfolgt über den mitgelieferten Kabelbaum, mit den blauen (CAN Hi) und gelben (CAN Lo) Leitungen, die mit wärmeschrumpfenden Crimpverbindungen in Automobilqualität geliefert werden, um wasserdichte Verbindungen herzustellen. Der mitgelieferte Kabelbaum enthält auch eine abgesicherte Pluspol-Batterie und eine Masseleitung. Zusätzlich gibt es 4 Ausgangsleitungen, die jeweils programmierbar sind, um auf verschiedene Eingaben zu reagieren, sei es: Fernlicht, Positionslicht, Zündung, Rückwärtsgang usw., und die mit jedem unserer Fahrzeug-Kits kompatibel sind (wenn der erforderliche Ausgang >1Amp ist).

Aktivierung, Synchronisierung und laufende Updates Ihres Canny Dongle werden über die App erreicht. Nachdem Sie über die eindeutige Seriennummer und die PIN Ihres Geräts vollständigen Zugriff erhalten haben, können Benutzer auf Installationsanleitungen für ihr Fahrzeug zugreifen, bevor sie das Gerät koppeln und die verschiedenen Beleuchtungsfunktionen zuweisen und testen. Updates, zum Beispiel nach Änderungen des Fahrzeugs, können ebenfalls über Bluetooth abgeschlossen werden.

Produktmerkmale: 

  • Wasserdichter IP68 CANNY-Dongle mit Molex-Stecker
  • Geeignet für die Montage sowohl im Motorraum als auch im Fahrzeuginneren
  • Verbindet sich mit den CAN-Leitungen des Fahrzeugs (Positionen der CAN-Leitungen und Anschlussmethoden werden über fahrzeugspezifische Anweisungen bereitgestellt, die nach dem Kauf über die APP heruntergeladen werden können)
  • Aktiviert bis zu 4 verschiedene Ausgänge (z.B. Fernlicht, Positionslicht, Rückfahrlicht, Zündung)
  • Bluetooth-Updates (Over-the-Air) über die CANNY-App – verfügbar auf Android und iOS
  • Technischer Support vom britischen Vertriebsteam
  • Kompatibel mit fahrzeugseitigen Kabelbaumsätzen (separat erhältlich)
  • Schnelles und benutzerfreundliches Installationsverfahren

Lieferumfang: 

  • CANNY-Dongle
  • CANNY-Kabelsatz
  • Schnellstartanleitung
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 14252265317

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 2376 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Mona T.
Alexandria, US
★★★★★ 5
Attractive
Size: 4 Panel-88'', Color: Grey
The assembled product is just as described. The screens look great! I am using them to hide the cluttered shelving in my garage. The area now looks quite neat Something I must say, though, is that the assembly was extremely difficult. I had to use a silicone spray and some pounding to get the A and B poles to fit together. Also, it required a great deal of strength to stretch and hold the fabric panels so that the bars inserted in each hem lines up with the screws inserted in A/B poles. I strongly recommend having a partner to help with the assembly. while sc and screw into poles them once inserted intetchedtne end of each pole ( and B poles barely fit together. I used silicone spray on the end and then pounded them
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 12, 2025
K
Verified Purchase
karine
Natrona Heights, US
★★★★★ 5
Works
Size: 3 Panel-102'', Color: Beige, Size: 3 Panel-102'', Color: Beige
It’s beige and not white. Once install - hard to disinstall. Need a drill to put it together
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
R
Verified Purchase
ralversity
Chelsea, US
★★★★★ 3
Does the job, but assembling by yourself is a nightmare
Size: 4 Panel-88'', Color: Black
Does it do the job? Yes, although as others said there are small gaps but it's not a huge deal. The price is also good. But the reason I'm giving it a 3/5 is simply because the assembly for this was a complete nightmare. I honestly don't think I would recommend this to anyone unless they have another person to help them assemble it, because doing it by myself was terrible. I don't think I'd buy this again, I think I'd opt to just spend a bit more money and save myself the trouble personally.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
T
Verified Purchase
Talagand
Battle Creek, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
J
Verified Purchase
Jennifer
Charlottesville, US
★★★★★ 5
Easy peasy
Size: 1 Panel, Color: Black
Bought this single-panel room divider for my son so he has a little privacy when he has to keep his camera on for online classes. It’s lightweight, easy to set up, and does the job—he can focus without me photobombing in the background. He can feel like he has his own tiny corner office, even if it’s just the basement.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 29, 2026

recommand products

BlueOptics Huawei QSFP28-100G-BIDI BlueOptics BO28L856S1D QSFP28 Transceiver, 100GBASE-SR2-BIDI, Multimode Fiber, 2x 850 / 910 nm, OM4 100 Meter
274.95
BlueOptics E810-CAM2-basierte Ethernet-Netzwerkkarte 100G dual-port QSFP28
247.45
BlueOptics NVIDIA MCP7F00-A02A-NV BlueLAN passives Ethernet, 100GBASE-CR4 QSFP28 auf 4x25GBASE-CR SFP28 Direct Attach Breakout Kabel, 3M,
109.90
POLARIS SPORTSMAN 1000 LE [2015-2021] - Starter Motor
118.50
POLARIS SPORTSMAN 1000 [2015-2021] - Starter Motor
118.50